Hioki IM7580, Instruction Manual

Page: 91 / 340

83
Sweep Measurement
Adding sweep points
1
1
Press [SETUP] .
2
4
3
2
Press [LIST] tab.
3
Move the cursor to the point to be added in the list
of sweep point with

/

or by scrolling.
To add a sweep point on the next point in the selected row.
4
Press [ADD] .
5
6
5
Set the measurement conditions for the sweep
points added.
See “4.4 Set Measurement Conditions for Sweep
Points” (p. 88).
• The setting range (
[POINT]
) of the sweep parameter is a
value between the selected row and the next point of the
selected row.
• [POINT] and [POINT DELAY] cannot be set for interval
measurements.
6
Press [SET] to confirm the setting.
Deleting sweep points
1
1
Press [SETUP] .
4
Analyzer Function