Hioki IM7580, Instruction Manual

Page: 166 / 340

158
Error Compensation
3
4
* Each common numeric keypad
[-] Inputs the unit with a minus (-) sign.
[×10
3
] Increases the prefix of the unit.
[/10
3
] Decreases the prefix of the unit.
[C] Repeats the input.
[CANCEL] Cancels the setting.
3
(1) Press
[OPEN MIN] .
(2) Set the limit values with the numeric
keypad*.
Settable range -9.99999 G to 9.99999 G
(3) Press [SET] to close the setting screen.
During open calibration measurement, an error occurs
if the DC measured value falls below this limit, and the
measurement is stopped.
4
(1) Press
[SHORT MAX] .
(2) Set the limit values with the numeric
keypad*.
Settable range -9.99999 G to 9.99999 G
(3) Press [SET] to close the setting screen.
During short calibration measurement, an error occurs
when the DC measured value exceeds this limit, and
the measurement is stopped.
5
Press [EXIT] to close the setting screen.