Hioki IM7580, Instruction Manual

Page: 123 / 340

115
Judging Measurement Results (Comparator Function)
4.8.3 Setting the Judgment Area to Display in the Measurement
Screen
1
1
Press [SETUP] .
2
3
2
Press [COMP] tab.
3
Press [AREA] .
4
5
4
Select the parameter that will display the judgment
areas.
[PARA1]
Displays the judgment area for parameter 1.
[PARA2] Displays the judgment area for parameter 2.
[PARA3] Displays the judgment area for parameter 3.
[PARA4] Displays the judgment area for parameter 4.
[OFF]
Judgment area is not displayed.
Selects the sweep parameter to display judgment area
on the second normal sweep graph if the graph display
setting is [MULTI] in the area setting of “GRAPH2”.
5
Press [EXIT] to close the judgment settings
screen.
6
Press [EXIT] to close the advanced settings
screen.
If it is difficult to see the judgment area of the graphical screen, increasing the brightness will
improve the visibility.
See “Setting the screen brightness” (p. 183)
4
Analyzer Function