Hioki IM7580, Instruction Manual

Page: 216 / 340

208
Timing Chart
• If the trigger setting is set to STEP, INDEX
― ――― ―
and EOM
―――
transition to LOW every time the measurement
for each point is completed, and transitions to HIGH if there is trigger input. ERR
―――
also transitions to
LOW each time measurement is completed if a measurement error occurs.
• Whether the judgment results of comparator measurement are reset at the time of the measurement
start signal or updated when measurement is completed, can be selected on the instrument or by a
communication command. See “8.6.4 Setting the EOM Output Method (EOM Mode)” (p. 218).LCR
Application Disk - Communication Commands (
:IO:RESult:RESET
).
• For each time of other timing charts, refer to Refer to “8.2.1 LCR Mode” (p. 205).