Hioki IM7580, Instruction Manual

Page: 40 / 340

32
Setting Basic Settings of Measurement Conditions
3.2 Setting Basic Settings of Measurement
Conditions
3.2.1 Setting Display Parameters
You can select up to 4 types from the 14 types of measurement parameters to display at any
arbitrary location.
The phase angle θ is shown in reference to impedance Z. When performing measurements using
admittance Y as the reference, the sign of the phase angle
θ
of impedance Z will be reversed.
Refer to “Appx. 1 Measurement Parameters and Calculation Formula” (p. A1).
Refer to “Appx. 3 Series Equivalent Circuit Mode and Parallel Equivalent Circuit Mode” (p. A4).
Parameters Contents
[Z] Impedance (
Ω
)
[Y] Admittance (S)
[
θ
]
Impedance phase angle (°)
[Rs] Effective resistance = ESR (
Ω
) (series
equivalent circuit)
[Rp] Effective resistance (
Ω
) (parallel
equivalent circuit)
[Cs] Static capacitance (F) (series
equivalent circuit)
[Cp] Static capacitance (F) (parallel
equivalent circuit mode)
[D] Loss coefficient = tan
δ
Parameters Contents
[G] Conductance (S)
[X] Reactance (
Ω
)
[Ls]
Inductance (H) (series equivalent
circuit)
[Lp] Inductance (H) (parallel equivalent
circuit)
[Q] Q factor
[B] Susceptance (S)
[OFF] No display
1
1
Press the parameter key that you want to set.
2
3
2
Select parameters.
3
Press [EXIT] .