Hioki IM7580, Instruction Manual

Page: 228 / 340

220
External Control I/O Settings
8.6.5 Setting Delay Time from Judgment Results Output until
Output of EOM
―――
(LOW) (JUDGE-EOM)
You can set a delay time between the judgment result output from the EXT I/O and the output of
EOM
―――
(LOW).
See LCR Application Disk - Communication Commands (
:IO:OUTPut:DELay
).
JUDGE EOM function: OFF
Previous
judgment result
Judgment
Result
TRIG
― ― ― ―
EOM
―――
ERR
―――
(Judgment
result output)
JUDGE EOM function: ON
Delay
Previous
judgment result
Judgment
Result
TRIG
― ― ― ―
EOM
―――
(Judgment
result output)
ERR
―――
1
3
2
1
Press [SETUP] .
2
Press [COMMON] tab.
( [ADVANCED] tab for ANALYZER)
3
Press [IO JUDGE] .
The numeric keypad
can be used for
input.
4
6
5
7
4
Set a delay time from the judgment result output
until EOM
―――
(LOW) output with

/

or the numeric
keypad.
(With the numeric keypad, press [SET] .)
Settable range 0.00000 s to 0.99999 s
[C] Repeats the input.
[CANCEL] Cancels the setting.
5
Press [RESET] .
6
Select whether to reset the comparator judgment
results when the signal changes to EOM
―――
(HIGH).
[OFF]
Stores the previous judgment results until
the next judgment results are output.
[ON]
Resets the judgment results when the
signal changes to EOM
―――
(HIGH).
7
Press [EXIT] to close the setting screen.