Hioki IM7580, Instruction Manual

Page: 334 / 340

A
22
Device Compliance Statement
Item Contents
11 Response capacity for block data Block data does not appear in responses.
12 List of standard commands and queries used See included LCR Application Disk.
13 Device state after the calibration query has been
completed successfully
“
*
CAL?
” command is not used.
14 Existence/nonexistence of “
*
DDT
” command “
*
DDT
” command is not used.
15 Existence/nonexistence of macro command Macros are not used.
16
Queries related to identification, explanation of the
response to the “
*
IDN?
” query
Description of communications commands in the
included LCR Application Disk. - “
*
IDN?
”
17
Capacity of the user data storage area reserved to
be used if the “
*
PUD
” command and the
*
PUD?
”
query are executed
“
*
PUD
” command and “
*
PUD?
” query are not used.
In addition, there is no user data storage area.
18
Resources when the “*RDT” command and the
“
*
RDT?
” query are used
“
*
RDT
” command and “
*
RDT?
” query are not used.
In addition, there is no user data storage area.
19
Conditions that are influenced if “
*
RST
”, “
*
LRN?
”,
“
*
RCL?
”, and “
*
SAV
” are used
“
*
LRN?
”, “
*
RCL?
”,
and
“
*
SAV
” are not used.
“
*
RST
” command returns the instrument to its initial
state.
Description of communications commands in the
included LCR Application Disk. - “*RST?”
20
Scope of the self-testing executed as a result of
the “
*
TST?
” query
Description of communications commands in the
included LCR Application Disk. - “
*
TST?
”
21 Additional organization of the status data used in a
device status report
See included LCR Application Disk.
22
Whether commands are overlap or sequential type All commands except
:CORRection:CALIbration:OPEN
,
:CORRection:CALIbration:SHORt
,
:CORRection:CALIbration:LOAD
,
:CORRection:COMPensation:OPEN
,
:CORRection:COMPensation:SHORt
,
and
:CORRection:COMPensation:LOAD
are sequence commands.
23
Criterion relating to the functions required at the
instant a termination message is produced, as a
response to each command
Operation is terminated when the command has been
parsed.