Hioki IM7580, Instruction Manual

Page: 129 / 340

121
Judging Measurement Results (Comparator Function)
4
5
4
Use

/

to select the No. of the local maximum
value or local minimum value for peak judgment.
See “4.7 Performing Measured Value Search”
(p. 107).
L-MAX
• Selects the No. of the local maximum
value.
The values are numbered as “1, 2, 3...”
(No.) starting in order from the largest
measured value of the detected local
maximum values.
• Settable range:1 to 5
L-MIN
• Selects the No. of the local minimum
value.
The values are numbered as “1, 2, 3...”
(No.) starting in order from the smallest
measured value of the detected local
minimum values.
• Settable range:1 to 5
5
Press [EXIT] to confirm the setting.
6 7
6
Press [FILTER].
7
Select enable or disable for the filter.
OFF
Disables the filter function.
ON Enables the filter function.
• Applying a filter allows you to reduce the misjudgments of
variations in measured values caused by noise and other
interference being judged as local maximum values or local
minimum values.
• The filter setting is synchronized with “4.7.2 Setting the
Search Type” (p. 108).
Local maximum
value (MAX),
Local minimum
value (MIN)
Segment No. for setting the judgment area
(This is not displayed when the segment
function is OFF.)
Measurement parameter that is
the judgment target
8
8
Display the conditions to set the judgment area
with

/

or by scrolling.
Select any of the following items as the condition to be
set for the judgment area.
• Segment No.
• Measurement parameters
• Local maximum value/Local minimum value
4
Analyzer Function