Hioki IM7580, Instruction Manual

Page: 115 / 340

107
Performing Measured Value Search
4.7 Performing Measured Value Search
When you perform a search, the cursor moves to the search result point and you can check the
search result.
You can perform search for the measurement results of one sweep using the method set in “4.7.2
Setting the Search Type” (p. 108).
The search target parameter is the parameter set in “4.7.1 Setting the Search Target Parameter”
(p. 107).
Setting of the search type etc. (p. 108)
Search target parameter setting (p. 107)
Filter setting (p. 109)
Auto search setting (p. 109)
Cursor A
Cursor B
4.7.1 Setting the Search Target Parameter
1 2
1
Press [PARA] of the target cursor.
2
Set the search target parameter.
[PARA1] Sets the measurement result of parameter
1 as the search target.
[PARA2]
Sets the measurement result of parameter
2 as the search target.
[PARA3] Sets the measurement result of parameter
3 as the search target.
[PARA4] Sets the measurement result of parameter
4 as the search target.
4
Analyzer Function