Hioki IM7580, Instruction Manual

Page: 180 / 340

172
Checking Contact Defects and the Contact State (Contact Check Function)
7.1.2 Setting the Judgment
1
2
3
1
Press [SETUP] .
2
Press [CONTACT] tab.
Press [SWEEP] tab for the ANALYZER mode.
3
Press [LIMIT] .
Sets the judgment reference value.
4
5
6
4
Press [HI] .
Set the upper limit value with the numeric pad and
press [SET] .
Settable range -9.99999 G to 9.99999 G
[-]
Inputs the unit with a minus (-) sign.
[ × 10
3
] Increases the prefix of the unit.
[/10
3
] Decreases the prefix of the unit.
[OFF] Value is not set.
[C]
Repeats the input.
[CANCEL] Cancels the setting.
5
Press [LO] in the same way as step 4.
Use the numeric keypad to set the lower limit
value and press [SET] .
Settable range -9.99999 G to 9.99999 G
6
Press [EXIT] to close the setting screen.
7 8
7
Press [ERR ABORT] .
8
If an error is detected during judgment, select
whether to stop or continue the measurement.
[OFF]
If an error is detected during judgment, the
measurement will not be canceled.
[ON]
If an error is detected during judgment, the
measurement will be canceled.
Go to the next page.