Hioki IM7580, Instruction Manual

Page: 78 / 340

70
Setting Basic Settings of Measurement
4.2.2 Starting Measurement at Any Arbitrary Timing (Trigger)
Set the trigger. The following are the three types of trigger that can be set for the instrument.
Refer to Step 4 for details on each trigger.
• Sequential sweep
• Repeat sweep
• Step sweep
The trigger setting that is set here differs from the trigger setting of LCR mode.
(It does not impact the trigger setting of LCR mode.)
1
3
5
2
4
1
Press [SETUP] .
2
Press [SWEEP] tab.
3
Press [TRIG] .
4
Select the trigger type.
[SEQ]
Performs a sequential sweep.
When an external trigger is input, sweep
measurement is performed only once.
[REPEAT]
Performs repeated sweeps.
Performs repeated sweeps with an internal trigger.
[STEP]
Performs a step sweep.
When an external trigger is input, measurement is
performed at the current measurement point and
then the process moves to the next measurement
point.
5
Press [EXIT] to close the setting screen.
When trigger is set to [SEQ] or [STEP]
• [TRIG] is displayed on the measurement screen.
• Each time you press [TRIG] , a sequential sweep or step
sweep is performed.