Hioki IM7580, Instruction Manual

Page: 231 / 340

223
9
Saving and Loading Panel
Information
This section describes how to save data (measurement conditions and compensation values) to the
instrument’s memory and how to subsequently load this data.
(Saves data at the moment [SAVE] is pressed.)
These operations are possible in both LCR mode and ANALYZER mode.
Saving data
(panel save function)
Saves the measurement conditions and compensation values.
(p. 224)
Reading data
(panel load function)
Loads the measurement conditions and compensation values.
(p. 227)
Editing saved data
Allows you to edit the panel name saved. (p. 229)
Deletes the saved panel. (p. 230)
Save screen
Displays the number of panels currently saved .
The color of the text changes based on the number of data items currently
saved as shown below.
MODE LCR ANALYZER
White 0 to 14 0 to 7
Yellow 15 to 29 8 to 15
Red 30 16
Displays the contents of the panel as a list.
Panel No. 1 to 46
Panel Name Up to 10 characters
Save Type
[SET+ADJ]
Measurement
conditions and
compensation
values
[SET]
Measurement
condition only
[ADJ]
Compensation
conditions and
compensation
values
Displays saved information.
[LOAD] Loads saved measurement
condition.
[SAVE] Saves the measurement
condition.
[RENAME] Allows you to changes the
panel name.
[DELETE] Deletes the panel.
9 Saving and Loading Panel Information
9
Saving and Loading Panel Information