Hioki IM7580, Instruction Manual

Page: 187 / 340

179
Other Functions
7.2.3 Setting the Communication Measurement Data Type
The types of measurement data to be acquired via communication are specified.
(See the Communication Commands Instruction Manual.
:MEASure:ITEM
,
:MEASure:VALid
)
1
2
3
1
Press [SETUP] .
2
Press [ADVANCED] tab.
3
Press [COM MEAS] .
6
4
5
4
Select the parameters required for the measured
value. (Multiple items can be selected.)
(
:MEASure:ITEM
setting)
[DISP PARA]
Clears the setting. The measured values to
be acquired in this case are the same as
the parameters (maximum 4 items) set on
the measurement screen.
5
Select the necessary items for the measurement
results. (Multiple items can be selected.)
(
:MEASure:VALid
setting)
6
Press [EXIT] to close the setting screen.
7
Application Function