Hinowa LightLift 15.70 3S, Technical Course Booklet

Page: 6 / 137

6
THE PRESENT MANUAL HAS TO BE CONTEMPLATE WITH INDICATIVE
PURPOSE, IT DOESN'T REPLACE ANYHOW MACHINE USE AND
MAINTENANCE MANUAL.
UNANNOUNCED VARIATIONS AND CORRECTIONS COULD BE APPLIED
ON MACHINES AND ON THE PRESENT DOCUMENT.
THEREFORE ALWAYS REFER TO USE AND MAINTENANCE MANUAL FOR
ORDINARY AND EXTRAORDINARY USAGE, FOR MAINTENANCE, FOR
PROBLEM SOLVING AND GENERALLY FOR ANYTHING REGARDING THE
MACHINE.
1. INTRODUCTION
This booklet describes the technical and safety features, the electrical system
and the hydraulic system of the Hinowa LightLift 15.70 3S Performance.
It does not include how to operate the machine, for this purpose refer to the
Operation and Maintenance Manual.
The first two digits of numerical part of the LightLift name identify the machine
maximum working height in meters, while the last two digits indicate the
maximum outreach in decimetres.
The aerial platform is equipped with an hydraulic system and an electrical
system that interact to ensure safe operating in any situation.
The present manual describes those two systems and how they interact.
1.1 PARTS DENOMINATION
The base sides of the machine are established looking from inside the basket,
which is positioned in the rear side as indicated in the draft below.
The aerial part booms are numerated looking from the base, i.e. from the turret
slew ring, to the basket as indicated in the draft below.
All the machine movements are controlled by the machine remote control
supplied with the machine. Usually, the remote control is positioned in the
LEFT
SIDE
REAR
SIDE
FRONT
SIDE
RIGHT
SIDE
OUTRIGGER
N.1
OUTRIGGER
N.4
OUTRIGGER
N.3
OUTRIGGER
N.2