Hinowa LightLift 15.70 3S, Technical Course Booklet

Page: 102 / 137

102
The type plate is placed on the noise crankcase insulating hood and includes
the following engine information:
1. engine type
2. code (only for special equipment)
3. engine number (also stamped on crankcase)
4. max. engine speed
For any offer as well as spare parts orders it is necessary to mention these
data (also see spare parts list).
A sensor located in the Hatz engine detects the rpm and communicates them
to the ECM1. The ECM1, according to the rpm information received from the
sensor and according to the movement selected by the operator, controls a
solenoid that regulates the rpm.
The configuration of the rpm is calibrated through the engine revolution
schedule.
In case of replacement, rpm regulation actuator has to be installed in order to
have the acceleration lever excursion completely included within the excursion
of the actuator piston, this condition has to be achieved by the regulation of
the piston shaft length.
It has to be make sure that its silent blocks are fine, when lever is at the end
of the stroke the piston must not force on the silent blocks and that shaft is
always aligned with the its piston.
RPM SENSOR
SOLENOIDE FOR
RPM CONTROL