Hinowa LightLift 15.70 3S, Technical Course Booklet

Page: 76 / 137

76
10. DIAGNOSE AND SETTINGS
LL15.70 as three main diagnose systems:

BY THE REMOTE CONTROL

BY R.A.H.M.

BY RAMHINO
By the present document are detailed the remote control diagnose functions
and settings.
R.A.H.M. is the system that allow to check the machine condition and GPS
condition without the need to be by the machine, it works through a laptop (or
a mobile phone) internet connected.
RAMHINO is the system that allow to check the “in time” machine condition
being aside the machine, it works through a laptop connected to the machine
CAN BUS system.
For further details on R.A.H.M. and RAMHINO systems are available the
relevant technical training.
10.1 DIAGNOSE AND SETTINGS BY REMOTE CONTROL
The remote control operational functions are indicated on chapters 3.3.
The
remote control includes an interactive display that should be always check
in particular situations such as movements avoided or breakdowns as it gives
operational and breakdown indication.
The following chapter details the remote control diagnose functions and
settings.
10.1.1 DISPLAY ICONS
The display indicates machine conditions and eventual errors occurred in order
to help operator and to have a quick diagnose, here follows icons meanings.
Close and
align the
machine
Safety state,
press and
release the
remote control
stop
Both motors
not running
Only jib
movement
allowed
ONLY
JIB
Rotate aerial
part on the
opposite side
Stop
button
pressed
Machine
closed and
aligned
Minimum
speed
Standard
speed
Maximum
speed for
tracks
Machine
stabilized
Engine
running
Electric
motor
running
Engine
preheating
active
Max tilt angle
reached while
driving
Lift outrigger
from the
ground
Max tilt angle
reached while
stabilizing
Unload the
basket from its
support
Lift 1 st -2 nd
booms
Select which
outrigger to
move