CALIBRATION PROCEDURE
NI 9361
8-Channel Counter Input Module
This document contains the verification procedure for the NI 9361. For more information
about calibration solutions, visit
.
Contents
Software.................................................................................................................................... 1
Documentation.......................................................................................................................... 1
Test Equipment..........................................................................................................................2
Test Conditions..........................................................................................................................2
Initial Setup............................................................................................................................... 3
Verification................................................................................................................................3
Accuracy Under Calibration Conditions...................................................................................5
Worldwide Support and Services.............................................................................................. 5
Software
Calibrating the NI 9361 requires the installation of NI-DAQmx 14.5 or later on the calibration
system. You can download NI-DAQmx from
. NI-DAQmx supports
LabVIEW, LabWindows
™
/CVI
™
, ANSI C, and Microsoft Visual Basic .NET. When you install
NI-DAQmx, you only need to install support for the application software that you intend to
use.
Documentation
Consult the following documents for information about the NI 9361, NI-DAQmx, and your
application software. All documents are available on
and help files install with the
software.
NI cDAQ-9174/9178 Quick Start
NI-DAQmx installation and hardware setup
NI 9361 Getting Started Guide
NI 9361 specific information
