29
4)
then press [1] again, “SS”displays in the edit box;
5)
Press [1] again, “ST”displays in the edit box;
6)
The interval of pressing the key [1] twice is not over
0.4 seconds .If over, you can press [
▲
] or [
▼
] to correct it;
Select file(.MEA&.COO)
Alph.
List
B.S
Enter
File：
ST
Select file(.MEA&.COO)
Alph.
List
B.S
Enter
File：
SU
Select file(.MEA&.COO)
Alph.
List
B.S
Enter
File：
SS
[1]
[1]
7)
Press [5] , “SUN” displays in the edit box;
Select file(.MEA&.COO)
Alph.
List
B.S
Enter
File：
SUN
8)
Pressing [Alph.] to switch to [Num.];
9)
Press [1];
10)
Pressing [Num.] to switch to [Alph.];
11)
press [7],as shown below:
Select file(.MEA&.COO)
Alph.
List
B.S
Enter
File：
SUN1A
● Input numbers
Example 2: Take Inputting the station in the surying mode
for example, which needs to input “-123.456” in the edit box.
1)
Because the edit box “NO” can’t be letter, the
inputting mode will default to “Alph.”, and can’t be
switched to “Num.”. The interface is as follows;
