108
Stake 0 508.306 1000.48
Altitude 324.325 329.247 325.689
Length 0 84.56 52.806
In the “Roadway” menu, select “Re-define (V)” to enter the
interface of “Define (V)-Begin”:
Define(V)-Begin
Mark:
Clear
B.S
Enter
Height:
Len.:
After inputting the “Mark”, “Height” and “Len.” (Length),
press [Enter] to confirm, and enter the interface of the point 01
input, as hown in picture below:
Define(V)-01
Mark:
Clear
B.S
Enter
Height:
Len.:
Then, you can input the “Mark”, “Height” and “Len.” for
other points in order. Finally, press [ESC] to end inputting and
enter the interface of “List of V curve”. The operations of the
key about [Save],[View] and [Add] refer to element method.
After finishing defining H and V curve, the last input will
be saved in the buffer cache and will be erased when shutting the
