78
Import data
1. Receive (.COO)
2. Receive (.COD)
AS an example of receiving coordinate data, press [1] to
enter the interface of “Select file(.COO)”;
Select file(.COO)
Num.
List
B.S
Enter
File:
123.COO
You can input the file name used to save the received data,
such as “123”(.COO). If the file exists in the instrument,
prompts “File Exist”. If selecting [List], you can select a file in
FLASH disk. After selecting file, press [Enter] to enter the
interface of importing;
Baud:
Slow
Fast
Import
File:
No.:
115200
123.COO
The only column that can be set is the Baud. The Baud
available are 2400, 4800, 9600, 19200, 38400, 57600, 115200
with respect to the RS232C serial communication bus. The
bauds can be set with soft keys [Fast] and [Slow]. Usually,
115200 Baud is adequate for importing.
Import: Import data. The process of importing requires
assistance of the connected computer. Firstly, the data must be
imported to the computer already and waited to be received by
instrument. Then press softy key [Import] to import the data.
