95
Press [2](List) to enter the interface of “Project(Begin)”, as
shown in the picture below. You can press [Input] to input
coordinate, or [List] to retrieve coordinates, then press [Enter] to
enter the interface of “Project(End)” . After inputting, back to
the projection menu;
Project（Begin）
E:
List
Input
Enter
Z:
m
m
N:
m
Measure base line point
In the interface of “Setup Baseline”, press [1](Meas) to
enter the interface of “Project(Begin)”,as shown in picture
below:
Project（Begin）
HR:
50°02′17″
Mode
Meas
Enter
SD:
m
HD:
m
VZ:
175°13′13″
T.H
Press [Meas] to start measuring, then press [Enter] to enter
the interface of “Project(End)”;
Project（End）
HR:
55°53′34″
Mode
Meas
Enter
SD:
m
HD:
m
VZ:
164°21′45″
T.H
Press [Meas] to start measuring, then you can press [Enter]
to return to “project” menu and press [3](Project)(3.Project) to
start projection measurement.
Projection
In the project menu, press [3](project) to enter the interface
