111
After inputting, press [ENT] to enter ‘Roadway- Center’
interface (if all deviations are zero):
Roadway-Center
Mark：
Edit
S.O
offset：
VD：
0.000
0.000
1.700
T.H：
0.000
The soft key functions under this page are as followed:
Key
Explanation
F1
Setup any mileage and target height
F2
No use in this page
F3
calculate the coordinate of the staked out point first
▲
Current mileage minus space to obtain new mileage
▼
Current mileage plus space to obtain new mileage
◄
Switch between ‘Roadway-Right’ →’Roadway-Center’
→’Roadway-Left’
►
Switch between ‘Roadway’-Left’→
‘Roadway-Center’
→‘Roadway-Right’
This interface displays the mileage of the mark. You can
press [ESC] to exit or Press [S.O] to enter the interface setting
put point information as following:
Pt.n：
Code：
Save
Enter
N：
E：
126595.622
326532.868
324.325
Z：
100.0
The “Pt.n” indicates the mileage of the mark selected
(which system accepts the maximum of is 8 characters).then you
can press [Save] to save the information of staking out to the
current coordinate file. Press [Enter] to enter the interface of
“Roadway-Calc”, which displays the azimuth angle and
