21
Auto shut off
[ 1. Never ]
2. 5minutes
3. 10minutes
Enter
Exit
4. 10minutes
You may choose ‘Never’ to cancel the auto shutdown.
When choosing 5, 10, 20 minutes opts, the instrument will shut
down automatically if there is no key pressed. Use the [▲] or
[▼] keys to move indicator ‘[]’ up and down to the option
wanted. Press soft key [Enter] or [ENT] to save the setting.
Pressing [ ESC ] will result in no changes of settings.
3.10 Set rectangle beep
Refer to the operation “Menu
→
5.Options
→
3.Other options
→
2. Rectangle Beep”. The interface as shown in picture below:
Rectanle Beep
[ 1. Off ]
2. On
Enter
Exit
3.11 Set up the Addictive Constant and the
Multiplying Constant
Refer to the operation “Menu
→
F4
→
2.Config
→
1.Add
const
→
2.Mul.const”.
The constants are already set through strict measurement
when being sold. You don’t need to adjust the setting. You may
alter the constant after strict measurement (e.g. in
standardization site for baseline being measured by authenticated
units).
