51
define the measured plane. Then, you can aim at the measuring
point ‘P0’, and the instrument will calculate and display the
coordinate of intersection of the defined plane and the
collimation axis. i.e the coordinate of “P0”.
Mention that the
target height under this mode must be zero.
P0
（
without prism
）
P1(with
Prism)
P2
(with
prism)
P3
(with prism)
In the menu of “Offset”, select “4. Offset (Plane)” to enter
the interface of “Offset –Pt.1”:
Offset (plane)-Pt.1
SD:
HR: 200°54′21″
m
Meas
HD:
Mode
VD:
Press [Meas] to measure point 1, and press [Enter] to
receive the measured data and enter to the interface of “Offset
(plane)-Pt.2”. Refer to the operation of measuring point 1 to get
the data of point 2 and point 3 to enter the interface of “Offset
(plane-Result)”;
Offset (plane)-Result
N： -12.909
HR： 195°20′16″
m
Next P
E： -3.541
Save
Z： 3.016
