84
which can be cut;
After copy the work file and coordinate file, you can open
them by transport software directly. After ending the connecting,
unplug the Mini USB cable, then press [ENT] to running the
program continually.
9.3.4 Format disk
This function can re-create the file system, but can’t format
U disk. After format system disk, the previous data will be all
lost, you must be careful.
9.3.5 Information of disk (MenInfo)
Display the available space of the system disk. The unit is KB.
1 KB can story 10 pieces of measurement data.
9.3.6 Update
This function is for you to upgrade the software of the
instrument. Press [1] on the second page of “Fileman” to enter
the interface of updating, as shown in picture below:
B.S
Enter
PIN
Clear
1)
Input “PIN” (82543), then press [ENT] with the
instrument shutdown;
2)
Connect the instrument to the computer through serial
port connector. Open the hyper terminal softwareand
set up the correct port. Then set ‘Bits per second ’ to
115200 and ‘ Flow control ’ to ‘ None ’. Finally, when
all operations above are done, press [ENT] to update.
