17
jitter and stop measuring .You can turn off the
compensator by the using star key(
★
) functions.
3.3 Set up the target Type
Our series total station has three reflectors to be selected,
which are prism, non-prism (NP) and reflect board (RB). You
can set by job. You can set it by star key [
★
].
3.4 Set up the Reflecting Prism Constant.
As a prism is selected as a reflector, a prism constant should
be set before any measurement. If the constant is entered and set,
it is saved and will not be erased after switching off the
instrument. After pressing [Para.] key under star key (
★
) mode,
a dialogue box would appear as followed.
Temp.:
Press:
Signal
℃
hpa
Clear
B.S
Enter
F1
3
F4
F2
F3
Prism c:
mm
PPM:
ppm
Signal
20
1013
0
0
3.5 Signal
The function of signal is to display the intensity of signal of
EDM (Electrical Distance Measurement). It can help achieve
ideal aiming result under poor conditions. If it is too difficult to
be found, using signal can easily aim at the target.
[F3]
Temp.:
Press:
Signal
℃
hpa
Clear
B.S
Enter
F1
3
F4
F2
F3
Prism c:
mm
PPM:
ppm
Signal:
20
1013
0
0
Temp.:
Press:
Signal
℃
hpa
Clear
B.S
Enter
F1
3
F4
F2
F3
Prism c:
mm
PPM:
ppm
Signal:
20
1013
0
0
12
