57
specified file. The coordinate file selection is as below:
Surveying
1.Station
1/2
2.Setup BBS
3.Meas
P1
[F4]
Surveying
1. Select file
2/2
2. Survey Config
P2
Select file
1.File(.MEA)
2.File(.COO)
3.File(.COO)
4.Linear file
Select file (.COO)
Num.
List
B.S
Enter
File：
BBB
[1]
[2]
Refer to “9.1.2.1 File selection for surveying”.
9.1.3 Station and backsight
The station and orientation of backsight point in the
surveying mode and coordinate measurement mode is common.
You can input or change the station point or orientation angle.
The two methods of setting station are as followed:
1)
Set station by using the data in memory;
2)
Input directly by keyboard;
Three methods of the orientation angle of backsight point are
followed:
1)
Set backsight point by coordinate in memory;
2)
Input the coordinate of backsight point directly;
3)
Input the orientation angle directly;
9.1.3.1 Example for set station
The operations of set station by using the data in memory:
1)
Enter the interface of “Set STA” with original data
displayed;
