110
to stake out.
10.2.1 Selecting Roadway File
There are two routes to select roadway file ([.LS] file)
1)
“Roadway ( menu) → “Open shape file”;
2)
“Roadway ( menu) → “Stake out(road)” →“Select
file”;
Both ways above lead to page of ‘select file’. You can
select
[4]
(LSH\V)
enter the interface of “Select
File(.LSH)”,which will list the horizontal alignment file (.LSH)
to be selected. After selecting the horizontal alignment (.LSH),
which will be store the data of horizontal alignment, you will be
prompted to select horizontal vertical alignment (.LSV), if you
need it , press [ESC], if don’t need it, press [ENT]. If you have
already opened the shape file successfully, press [ESC] to end
the dialogue. If not, then repeat the steps above until the file is
selected and opened.
10.2.2 Setting station and BBS(backsight point)
See reference in setup BBS and setup station
10.2.3 Stake out road
Before staking out Roadway, please first enter the
parameters required for staking out. e.g starting mileage, space
between, “L dist”(left distance), “R dist”(right distance), “L dV”
and “R dV”.
Parameter 2/2
L dist：
Clear
B.S
Enter
R dist：
L dv：
R dv：
Parameter 1/2
Clear
B.S
Enter
Start：
Space：
0
20
[F4]
Enter
