91
2)
Press [T.H] to input coordinates , then press [ENT] to
enter the interface of “MLM(A-B,A-C)-Step 2”;
MLM（A-B,A-C）-Step 2
VZ:
Coord.
T.H
Meas
Mode
HR:
HD:
72°32′12″
132°08′13″
m
3)
Get the coordinates by the same way of the “Step-1”,
then press [ENT] to enter the interface of “MLM
(A-B,A-C)-Result”;
The result displayed is the measurement from first point to
second point; If you press [Next P], you will repeat the
operations of “MLM (A-B,A-C)-Step2”and “MLM (A-B,
A-C)-Result”,and can get the measurement result of first point
and other point;
As to “MLM(A-B,B-C)” , it’s calculation of start point is
different, which is the previous of the measure point, but the
other operation are same as “MLM(A-B,A-C)”;
9.4.3 Coord.Z
This function is that use the measured data of known points
to calculate the Z coordinate of station and reset Z coordinate.
You can get the coordinate data of known points from
coordinate data or by keyboard. The operations as follows:
1)
Set station, select “Setup STA”
；
Coord. Z
Setup STA
Coord.
List
Input
Enter
Pt.n：
1
Here, you can press [Coord.] to input station point, or
