104
Selecting “Re-define(H)” to enter the interface of
“Define(H)”:
Define(H)
Spiral
Circle
Line
I.P
Mark：
0.000
Az:
0°00′00″
If you selecting “I.P”(intersection piont) for the first time,
you will input by intersection method.
Select a line type, if you don’t input start point, enter the
interface of “Define(H)-Begin”, then you can select the other lie
type to input. After finishing the input, press [ENT] to enter the
interface of “List of H curve”;
Define(H)-Begin
Clear
B.S
Enter
N:
E:
Mark:
Note: Do not define the length as ‘0’, which indicates
ending the alignment.
Input “Line”:
Define(H)-Line
Clear
B.S
Enter
AZ:
0.0000
Len.:
Input “Circle”:
