manualshive.com logo in svg

Hasselblad CF DIGITAL CAMERA BACK RANGE, User Manual

The Hasselblad CF Digital Camera Back Range is a cutting-edge photography tool. Capture stunning images with this high-performance device and easily navigate its features using the comprehensive User Manual. To maximize your experience, download the free manual from manualshive.com and begin exploring the endless possibilities of Hasselblad photography.

Share
Download
background image

General Tab

The

General

tab of the

Setup

window affects the general behavior of the

interface and identifies the setup file currently loaded.

Mode

Provides a pop-up menu for choosing the color space used when you save

an image as a TIFF file. The following options are available:

•

RGB

: stores final images as standard 8-bit RGB TIFF files.

•

RGB 16-bit

: stores final images as 16-bit TIFF files. This preserves the

full color resolution captured by the camera back, but creates larger files

that many applications cannot read.

•

Grayscale

: creates grayscale images, such as black and white

photographs. Grayscale files are smaller than color files, so use this

mode if your originals or final publications are in black and white. To

obtain a grayscale result,

FlexColor

combines information from all three

RGB color channels. ICC profiles have no effect when you capture

images using this mode.

•

Grayscale 16-bit

: stores final images as 16-bit grayscale TIFF files. This

preserves the full tonal range captured by the camera back.

To obtain a grayscale result,

FlexColor

combines information from all

three RGB color channels.

Software Reference - FlexColor 4.0 for Camera Backs

The Setup Window

32

General Tab

Summary of Contents for CF DIGITAL CAMERA BACK RANGE
































































































































































































































Reviews:

No comments

Related manuals for CF DIGITAL CAMERA BACK RANGE

StoneAge AUTOSTROKE AST-200-V2 User Manual preview
AUTOSTROKE AST-200-V2
Brand: StoneAge Pages: 28
Lauterbach C6000 Manual preview
C6000
Brand: Lauterbach Pages: 67
Bang & Olufsen BEOLINE User Manual preview
BEOLINE
Brand: Bang & Olufsen Pages: 12
e2 elektro BIM-BAM GNS-921 Quick Start Manual preview
BIM-BAM GNS-921
Brand: e2 elektro Pages: 2
K&M 19784 Information For Use preview
19784
Brand: K&M Pages: 6
NATURE & DECOUVERTES ELO Manual preview
ELO
Brand: NATURE & DECOUVERTES Pages: 13
Xerox 5500DN - Phaser B/W Laser Printer Manual preview
5500DN - Phaser B/W Laser Printer
Brand: Xerox Pages: 2
Xerox 3600B - Phaser B/W Laser Printer Install Instructions preview
3600B - Phaser B/W Laser Printer
Brand: Xerox Pages: 2
Baumer UNAM 12N8910/S14OD Manual preview
UNAM 12N8910/S14OD
Brand: Baumer Pages: 3
Sport-Tec Fun 19 Manual preview
Fun 19
Brand: Sport-Tec Pages: 22
eufy Security T8020 Quick Start Manual preview
T8020
Brand: eufy Security Pages: 12
Meyer Drive Pro EZ Build 41130 Assembly And Installation Manual preview
Drive Pro EZ Build 41130
Brand: Meyer Pages: 11
White Outdoor W-151 Service Advisory preview
W-151
Brand: White Outdoor Pages: 4
Viking FDSB5481 Series Service Manual preview
FDSB5481 Series
Brand: Viking Pages: 54
Uebler X21 nano Mounting And Operating Instructions preview
X21 nano
Brand: Uebler Pages: 56
Safe Fleet PRIME DESIGN VRR-NV200 Manual preview
PRIME DESIGN VRR-NV200
Brand: Safe Fleet Pages: 12
Manfrotto MKC3-H01 Instructions preview
MKC3-H01
Brand: Manfrotto Pages: 2
ZWO Electronic Automatic Focuser Detailed Installation And Operations Manual preview
Electronic Automatic Focuser
Brand: ZWO Pages: 38

Brands by name

Popular brands

Load more brands