Hasselblad CF DIGITAL CAMERA BACK RANGE User Manual Download

Page: 151 / 223

Make Default

Use button to select the entry with the settings that the

file should be opened with. The check mark to the left

indicates which entry is currently selected as default.

The settings of the entry selected as default are also

applied to the thumbnails displayed in the

Info

window

and in the

Thumbnails

window.

Add Current

Adds an entry to the list with the settings of the image

currently displayed in the

FlexColor

preview.

Software Reference - FlexColor 4.0 for Camera Backs

The Info Window

Using the Info Window

Summary of Contents for CF DIGITAL CAMERA BACK RANGE
































































































































































































































Search results

Summary of Contents for CF DIGITAL CAMERA BACK RANGE

Reviews:

Related manuals for CF DIGITAL CAMERA BACK RANGE

Brands by name

Popular brands

Hasselblad CF DIGITAL CAMERA BACK RANGE, User Manual

Search results

Summary of Contents for CF DIGITAL CAMERA BACK RANGE

Reviews:

Related manuals for CF DIGITAL CAMERA BACK RANGE

Brands by name

Popular brands