Hasselblad CF DIGITAL CAMERA BACK RANGE User Manual Download Page 214

Page: 214 / 223

Part 2: FlexColor for Cameras

Importing Camera Images

active 3F folder (this is also the folder currently shown in the

Thumbnails

window). See “Load Window Buttons and Controls”, below, for details.

Update

: updates the selection of images shown in the

Import

window. Use

this if you have used the file system to modify the contents of the import
folder while the

Import

window was open.

Approval assignment buttons

: reassign the approval level of the selected

images.

Approval filter buttons

: restrict the set of images shown in the

Import

window. You can select one, two or all three filters. Images hidden by the
filter will not be imported. See also Figure 2 on page 9.

Include transferred

: mark this to include images that you have already

imported. Clear this box to hide them.

Search

: to restrict the set of images shown in the

Import

window, enter text

here. Only images that include the text you enter will be shown. Hidden
images will not be imported.

Sort controls

: Use the

Sort by

pop-up menu to chose to sort by either date or

name. Use the button next to the window to control whether the images should
sort by ascending or descending values. Mark the

...and approval

check box

to further sort by approval level, with the other sort settings acting as
secondary criteria.

Size

: Use this pop-up menu to set the size of the thumbnail images shown in

the Import window.

You can select images in the

Import

window by doing any of the following:

Single-click to select a single image

Shift-click to select a range of images between the currently selected image
and the image on which you click.

Command-click (Mac OS) or Ctrl-click (Windows) to toggle the select status
of any image.

Load Window Buttons and Controls

The

Load

window enables you to fine-tune your image selection for import. It also

enables you to apply initial settings to the imported image.

The following controls are provided:

FlexColor 4.5 Documentation Addendum

Summary of Contents for CF DIGITAL CAMERA BACK RANGE
































































































































































































































Search results

Summary of Contents for CF DIGITAL CAMERA BACK RANGE

Reviews:

Related manuals for CF DIGITAL CAMERA BACK RANGE

Brands by name

Popular brands

Hasselblad CF DIGITAL CAMERA BACK RANGE, User Manual

Search results

Summary of Contents for CF DIGITAL CAMERA BACK RANGE

Reviews:

Related manuals for CF DIGITAL CAMERA BACK RANGE

Brands by name

Popular brands