background image

  H1 / 

H1D / H2 / H2D / H3D only

www.hasselblad.com  

3/5

Custom option #31

ADDENDUM to H1 / H1D / H2 / H2D / H3D / 503CWD / 
CFV / CF - USER MANUAlS

Delete last image

the ’Delete last image’ has now been implemented to 
the customizable button function list. Consequently 
by just pressing the USER, AE-l, StoP DoWN or M.UP 
button, you are now able to immediately delete the 
last image. Please note that for this action to be car-
ried out, there should be no intervening action taken. 
So, for example, if you zoom in to check the image you 
cannot then delete it using this particular feature but 
must use the regular procedure on the sensor unit.

 

H1D / H2D / H3D only

Profiles

ISo, white balance, colour temperature and colour tint 
are now also stored in the camera profiles.

Standby mode

It is now possible to turn the camera off directly from 
Standby mode.

On / Off

the amount of time that the oN-oFF button must be 
depressed before turning the camera on has been 
increased from 500 ms to 750 ms to avoid unin-
tentional battery drain (inadvertently pressed in a 
camera bag, for example).

‘Extra mirror delay’ is acti-
vated either by loading the 
‘Standard’ profile or making 
a manual change in Custom 
Option #31. 
The factory default settings 
list now includes a 50 ms 
extra mirror delay.

Extra mirror delay 

Camera shake is common with longer hand-held 
exposures leading to a loss of sharpness. the normal 
remedy of using a tripod or support and manually rais-
ing the mirror is not always suitable however. 

to counteract this situation, you can now increase the 
delay time between the mirror settling into its raised 
position and the opening of the shutter. Although the 
time period here is in milliseconds, tests have shown 
a marked improvement in many cases. Consequently, 
slower shutter speeds can be considered (whether 
hand-held or on a tripod/support) than would normally 
be advised while still retaining sharpness normally 
only obtainable with faster shutter speeds. 

there are a number of factors — shutter speed/stur-
diness of tripod or support/focal length of lens — to 
take into account when determining the ideal setting. 
50 milliseconds is suggested as a good starting point 
for experimentation and is the default setting.

Default setting

50 ms

Summary of Contents for CF DIGITAL CAMERA BACK RANGE
































































































































































































































Reviews: