Hasselblad CF DIGITAL CAMERA BACK RANGE User Manual Download Page 139

Page: 139 / 223

Show

Displays the currently selected image in the main

FlexColor

window, where you can view and work with it (this can also

be obtained by double-clicking on an icon). The crop, mode,

color and image-enhancement settings selected as default for

the selected file will also be loaded into

FlexColor

. The

button is only available when you have selected a single

image.

Please note that when double-clicking an icon or clicking the

Show

button, a low-resolution image will be displayed

immediately in the preview window.

If image has already been processed, the high resolution

preview is being processed in the background and when

finished the preview is updated (typically after 20-30 secs).

Save

This button saves all of the currently selected

Thumbnails

images. When you click the button, the

Batch Save

window

appears, asking if you would like to save using the

Individual settings & cropping

saved with each file, or to

apply the

Current settings & cropping

(as seen in the

current preview of the main

FlexColor

window) to all

captures.

Choose either of the settings and then use the

Mode

pop-up

menu to select one of the following save options:

Normal

to save the selected images as TIFF-files.

Preview:

to save the selected images as a low-resolution

TIFF-file for preview purposes.

Layers:

to save the selected images as separate layers in

a Photoshop file (.psd)

Having selected the appropriate save options, click the

Save

button.

Previews are saved in the foreground while saving images

using the

Normal

Layers

modes will take place in the

background and the save tasks will be added to the list in

the

Task

window (see "The Task window" on page 111 for

details).

Software Reference - FlexColor 4.0 for Camera Backs

The Thumbnails Window

Using the Thumbnails Window

Summary of Contents for CF DIGITAL CAMERA BACK RANGE
































































































































































































































Search results

Summary of Contents for CF DIGITAL CAMERA BACK RANGE

Reviews:

Related manuals for CF DIGITAL CAMERA BACK RANGE

Brands by name

Popular brands

Hasselblad CF DIGITAL CAMERA BACK RANGE, User Manual

Search results

Summary of Contents for CF DIGITAL CAMERA BACK RANGE

Reviews:

Related manuals for CF DIGITAL CAMERA BACK RANGE

Brands by name

Popular brands