Hasselblad CF DIGITAL CAMERA BACK RANGE User Manual Download Page 129

Page: 129 / 223

In some cases, an ICC profile for your (or your service bureaus) specific

output device may be available. If so, then use it instead.

If your results are not satisfactory, then speak with your printer for advice

about how you should modify the profile. See "Editing ColorSync Color

Profiles" on page 56 for instructions.

Editing ColorSync Color Profiles

NOTE!

The profile editor is only available with the Mac OS version of

FlexColor

includes both a ColorSync input profile designed for the Ixpress

digital camera backs and a set of generic output profiles, each of which is

designed to create good results under a different set of conditions.

These generic profiles will deliver adequate to excellent results. If, after

testing an output profile and speaking with your service bureau, you find

that you would like to fine tune an output profile, then follow the

procedure below.

The settings available for editing the output profiles are both highly

detailed and very powerful. In general, they are intended for users who

are very experienced in making color separations. Most likely, you should

speak with your service bureau about how to make these settings.

Software Reference - FlexColor 4.0 for Camera Backs

FlexColor ICC Profiles

Editing ColorSync Color Profiles

Summary of Contents for CF DIGITAL CAMERA BACK RANGE
































































































































































































































Search results

Summary of Contents for CF DIGITAL CAMERA BACK RANGE

Reviews:

Related manuals for CF DIGITAL CAMERA BACK RANGE

Brands by name

Popular brands

Hasselblad CF DIGITAL CAMERA BACK RANGE, User Manual

Search results

Summary of Contents for CF DIGITAL CAMERA BACK RANGE

Reviews:

Related manuals for CF DIGITAL CAMERA BACK RANGE

Brands by name

Popular brands