manualshive.com logo in svg

Hasselblad CF DIGITAL CAMERA BACK RANGE, User Manual

The Hasselblad CF Digital Camera Back Range is a cutting-edge photography tool. Capture stunning images with this high-performance device and easily navigate its features using the comprehensive User Manual. To maximize your experience, download the free manual from manualshive.com and begin exploring the endless possibilities of Hasselblad photography.

Share
Download
background image

Part 2: FlexColor for Cameras

 

Using Reproduction Mode 

During standard operation (when not using reproduction mode), colors are mapped in 
a way that is most appropriate for everyday photography. An important feature of this 
processing is its emphasis on reproducing pleasing skin tones for all types of skin. The 
result still provides extremely accurate color reproduction, but also more attractive 
skin tones. In addition, a film curve is applied to provide correct exposures with the 
current ISO setting. 

When using reproduction mode, however, color reproduction is perfectly linear, 
which provides the most accurate and mathematically correct color reproduction 
possible. Images will have lower contrast and the sensitivity drops by about one third 
of an f-stop. Therefore, if you want to use reproduction mode, we advise that you 
capture with it already turned on rather than capturing in normal mode and then 
switching during postproduction. It is possible to switch later, but you will have less 
control over highlight exposure and might risk a loss of detail in these areas. 

Note that when you use reproduction mode, the linear film curve means that it is extra 
important to use the correct exposure. To avoid loosing highlight information, we 
recommend exposing for the whites instead of the midtones. 

Reproduction mode is not available when scanning or editing scanned images. 

To set FlexColor to reproduction mode, open the 

Color Correction

 window (e.g., by 

selecting 

Window > Color Correction

 from the menu bar) and mark the 

Reproduction mode

 check box. 

 

FlexColor 4.5 Documentation Addendum

  

27 

Summary of Contents for CF DIGITAL CAMERA BACK RANGE
































































































































































































































Reviews:

No comments

Related manuals for CF DIGITAL CAMERA BACK RANGE

Campbell HMP50 Instruction Manual preview
HMP50
Brand: Campbell Pages: 20
Xylem CK 300 Addendum To Operating Manual preview
CK 300
Brand: Xylem Pages: 60
Camcar 40052 Mounting Instructions preview
40052
Brand: Camcar Pages: 6
Gates POVCAM AG-HCK10G Using preview
POVCAM AG-HCK10G
Brand: Gates Pages: 2
3Doodler Start Manual preview
Start
Brand: 3Doodler Pages: 24
Cabletron Systems MMAC-Plus 9F116-01 Reference Manual preview
MMAC-Plus 9F116-01
Brand: Cabletron Systems Pages: 4
Caberg HORUS Manual preview
HORUS
Brand: Caberg Pages: 16
Yolin YL80C Manual preview
YL80C
Brand: Yolin Pages: 25
EAL Formula 523585 Assembly Instructions preview
Formula 523585
Brand: EAL Pages: 4
Jeda Wireless Pad Manual preview
Wireless Pad
Brand: Jeda Pages: 8
Lanier 5722 Datasheet preview
5722
Brand: Lanier Pages: 3
Oki OKICOLOR8n Replacement Instructions preview
OKICOLOR8n
Brand: Oki Pages: 4
Velleman MM102 User Manual preview
MM102
Brand: Velleman Pages: 2
Velleman 959 Operating Manual preview
959
Brand: Velleman Pages: 9
Xerox Phaser 6360 Supplementary Manual preview
Phaser 6360
Brand: Xerox Pages: 13
Xerox DocuColor 242 Release Note preview
DocuColor 242
Brand: Xerox Pages: 41
Tamiya KO PROPO RTF 2002 ESC Manual preview
KO PROPO RTF 2002 ESC
Brand: Tamiya Pages: 2
Bamo MAXIMAT LWC-B Instruction Manual preview
MAXIMAT LWC-B
Brand: Bamo Pages: 4

Brands by name

Popular brands

Load more brands