Hasselblad CF DIGITAL CAMERA BACK RANGE User Manual Download

Page: 87 / 223

The File Menu

The

File

menu includes entries that initiate image captures and make

settings for

FlexColor

•

Capture

: Captures an image using your current settings and saves it as

file (see page 10 for details). A preview of the image will be

displayed in main

FlexColor

window right away, though rendering of

the image will continue in the background for several seconds

afterwards. You will not be able to view the image in full resolution

until the rendering is finished, though you can make other types of

settings. All setting are previewed using the full 16-bit color depth to

display results.

•

Save

: Saves the image currently shown in the

FlexColor

window as a

standard TIFF file. All current crop, mode, color and image-

enhancement settings will be applied to the saved image.

•

Close

: Closes the currently selected window if possible.

•

Setup

: Opens the

Setup

window, in which most of the basic settings for

an image capture can be made, saved and loaded.

See "The Setup Window" on page 29 for more information.

Software Reference - FlexColor 4.0 for Camera Backs

FlexColor Menus

The File Menu

Summary of Contents for CF DIGITAL CAMERA BACK RANGE
































































































































































































































Search results

Summary of Contents for CF DIGITAL CAMERA BACK RANGE

Reviews:

Related manuals for CF DIGITAL CAMERA BACK RANGE

Brands by name

Popular brands

Hasselblad CF DIGITAL CAMERA BACK RANGE, User Manual

Search results

Summary of Contents for CF DIGITAL CAMERA BACK RANGE

Reviews:

Related manuals for CF DIGITAL CAMERA BACK RANGE

Brands by name

Popular brands