GSM-20H10 User Manual
73
OVP
Press the up and down arrow keys to move the cursor
to the OVP state option box and press the Enter key to
select Enable or Disable.
When you select Enable, the OVP function is enabled,
and the OVP symbol
is displayed in the status
bar.
When the output exceeds the OVP Value, the OVP
status indicator is lit in red
, indicating that the
OVP status is entered, and the actual output is limited
to the programmed OVP Value.
Auto
delay
It is used to set the automatic delay time. The delay
time refers to the delay phase in the Source-Delay-
Measurement (SDM) cycle, which depends on the
selected Source range.
In addition to static source and/or measurement
operations, GSM operations may include a series of
Source-Delay-Measurement (SDM) cycles. During
each SDM cycle, the following will happen:
1.
Set the source value
2.
Wait for the source delay
3.
Take measurement reading
