BASIC OPERATION
56
keys, and press the Enter key to confirm
parameter setting.
For numerical setting items, after selecting and
Entering, if the pull-up and drop-down arrows
appear, it means that there are multiple range
options. Use the up and down keys to select
the corresponding range, then enter the
required value, and press Enter to confirm to
complete the parameter setting. The value
settings of other interfaces are similar to this.
NOTE: After moving the cursor to area
③
, in
the case of non-parameter setting, operating the
number "7" and "4" keys can toggle the
measurement reading between Voltmeter and
Ammeter.
Description Under Source and Measurement mode, the GSM
can toggle between V-source and I-source, and can
also display the programming source value and
measurement reading value. There are two ways of
front and rear output (when the identifier REAR in
the status bar is displayed, it means the output is
from the rear panel, otherwise the output is from
the front panel). The front and rear panels cannot
output at the same time.
Parameter Description And Operation
V
src
/I
src
Set the power supply as V-Source or I-Source. When
it is in the editing state (press Edit/Lock key to
make the number digits turn into white characters
on a black background), the range can be changed
by the up and down keys.
NOTE: V
src
and I
src
can be toggled
by
button. The selected measurement range
affects the accuracy of measurement and the
