GPSoverIP GPSAUGE GPSeye IN1, Manual, Page: 159 / 421

15
15. System
159
15.2. Administration
The Administration area is password protected. You as owner or system administrator
can determine, if and which other areas of the GPSeye IN1 (e.g. E-Mail, Entertainment
options, Internet access etc.) the end user might use and/or which options to block for
him.
If locked, the respective buttons will be highlighted in grey and cannot be used by the end
user. These settings can always be changed by the administrator. (also refer to section
„ 15.2.3 Manage Administrative Areas “ on p. 110 )
Figure 15.8.: Enter Password
Click the button
Continue
to use the entered password.
15.2.1. Set password
The GPSeye IN1 is supplied with the password “0000” (4 x Zero). As owner/system
administrator you can and should set a new password prior to installation in the vehicle.
The password (also a general admin code for all units of the fleet is possible) must consist
of at least 4 characters.
Service level: October 2008 GPSeye IN1 (InOne) © GPSoverIP GmbH