GPSoverIP GPSAUGE GPSeye IN1, Manual, Page: 195 / 421

16
16. GPS Explorer Local Edition
195
If your route planner is not recognized automatically, select the ioption
User defined
and
drag the icon of the route planner from your desktop on the “target”, which opens upon
drop down.
Figure 16.14.: Target
The settings to start the route planner together with the GPS Explorer will be automatically
set for the program.
After that restart the GPS Explorer!
To test the configuration, close the GPS Explorer and restart it. The route planner will
now automatically start with the GPS Explorer and be embedded in the graphical user
interface of the GPS Explorer.
If the route planner does not show a vehicle (displayed as circle), you have to set it to
GPS-tracking via interface COM4 if applicable; then the program is ready to operate.
Refer to the documentation of your route planner for its installation and configuration.
A list of supported route planners can be found in section „ 20.3 Supported Route Planners “
on p. 239 .
Service level: October 2008 GPSeye IN1 (InOne) © GPSoverIP GmbH