GPSoverIP GPSAUGE GPSeye IN1, Manual, Page: 74 / 421

74
8. Installation
• Make sure that the power connection can be separated without much effort when
connected to the vehicle power supply. The separation is reasonable, when the
vehicle is parked for a long time (longer than 2 weeks).
• Do not snap or squash the connecting cable. Avoid freely laying cable routes when
installing into the vehicle so that nobody can get stuck or stumble.
• Also avoid a mounting position for the GPSeye IN1 in which it can be considered
as shielded by metal faces or metal-coated windows or reception may be affected. It
weak networks, it can be detected if you hear a kind of “ticking” during operation.
This has to do with the amplifying transmission power of the device and is a normal
process. If these noises should occur permanently, please change the location of the
GPSauge IN1 in order to stop these interferences.
• Also check whether this effect occurs through other devices.
Also pay attention to the note on safety in section „ 3 General Notes on Safety “ on p. 17 .
For questions please contact the GPSoverIP Customer-Service.
GPSoverIP Customer-Service
T
+49 (0) 97 21 79 69 73 45
v
+49 (0) 97 21 79 69 73 59
Mail support@GPSoverIP.com
© GPSoverIP GmbH GPSeye IN1 (InOne) Service level: October 2008