GPSoverIP GPSAUGE GPSeye IN1, Manual, Page: 161 / 421

15
15. System
161
To block an area from access, click on the corresponding button. Click on the corresponding
button again to release an area for access.
15.3. Screen
On the page
Screen
you can adjust the brightness of the screen.
Figure 15.10.: Adjust screen
Via the setting
Auto-Brightness
you can turn the automatic brightness adjustment on or
off. We recommend to turn on the automatic brightness adjustment.
You can make individual adjustments to the brightness via the buttons.
You can also adjust the idle time after which the screen will be darkened to save energy.
The GPSeye IN1 suggests some values. We recommend the
System
setting since only in
this way the newly developed Power Management of the device can take over all tasks.
Please consider that with insufficient power supply of your vehicle the times should be
chosen quite short, e.g. 2.5 minutes. Alternatively provide an adequate power supply.
With activation, e.g. the navigation the screen will stay switched on.
Service level: October 2008 GPSeye IN1 (InOne) © GPSoverIP GmbH