GPSoverIP GPSAUGE GPSeye IN1, Manual, Page: 348 / 421

348
20. FAQs on Hard- and Software
Case Answer
No Bluetooth pairing
to mobile phone.
• Check whether your mobile phone has a Bluetooth option
and whether it is activated.
• Probably other devices nearby will cause inconsistent
interferences. Please re-activate the Bluetooth option on
your cell phone and also restart GPSeye IN1.
• Probably the charge voltage of one of the devices is too
low. Please provide sufficient charge in this case, e.g. by
connection to the vehicle’s power system.
• You activated Bluetooth too late on your cell phone. Just
push the
New Connection
again.
Whilst starting the
GPSeye IN1 you hear
a warning signal
The Bluetooth function ist still activated. If neccessary, de-
activated the Bluetooth function in the device menu.
The built-in FM-
transmitter does not
work.
Make sure that the frequency set at GPSeye IN1 corresponds to
the one of the car radio (refer to section „ 15.4.1 FM Transmitter “
on p. 114 ). You can set two frequencies at GPSeye IN1. Check
whether the car radio maybe receives on another frequency.
Make sure that the FM-transmitter function is activated.
Table 20.1.: FAQs on Hardware GPSeye IN1
© GPSoverIP GmbH GPSeye IN1 (InOne) Service level: October 2008