GE Voluson 730Pro Basic User Manual Download Page 372

Page: 372 / 480

Printing / Recording / Saving / Sending

16.3.5

Save as AVI file

With this function the following sequences are stored as AVI files to MO or CD-R/W disk:

•

2D Cine (Sequence of 2D images or 2D/CFM images)

•

3D Rot. Cine (Sequence of a rotating 3D image)

•

4D Cine (Sequence of 3D images)

Remark:

Storing is only possible if the above sequences are available.

Operation:

1. Press these keys to save the obtained Cine sequence.

The menu area displays the Save menu.

2. Select

the

[

Save as AVI

]

item.

The Save as AVI-file” menu appears in the menu area.

3. Select the desired Cine sequence.

4. The “Save as AVI” window appears on the screen.

Voluson

730Pro - Basic User Manual

16-12

105831 Rev. 0

5. Choose the media (e.g. CD-R/W) and adjust the compression (slider: Reduction Ratio).

Summary of Contents for Voluson 730Pro
































































































































































































































































































































































































































































































Search results

Summary of Contents for Voluson 730Pro

Reviews:

Related manuals for Voluson 730Pro

Brands by name

Popular brands

GE Voluson 730Pro, Basic User Manual

Search results

Summary of Contents for Voluson 730Pro

Reviews:

Related manuals for Voluson 730Pro

Brands by name

Popular brands