GE Voluson 730Pro Basic User Manual Download Page 368

Page: 368 / 480

Printing / Recording / Saving / Sending

16.3.2

Saving 2D Cine

Operation:

1. Press this key to save the scanned 2D Cine sequence.

The menu area displays the “Save 2D” menu.

2. Select

the

[

2D Cine

]

item.

3. Adjust the start and end image of the

2Dsequence (cine loop) by rotating
these two controls.

4. Select the desired “Save/Send” destination among:

Saving to Sonoview

Sending to an external DICOM server.

Saving to Sonoview as well as sending to an external DICOM server.

5. Press the right or left trackball key to save the scanned 2D Cine Sequence.

During the save process the message “Saving in progress” will be displayed on the
screen!

Save with Comment

review:

(chapter 16.3.6)

For restoring of saved images review:

Sonoview

(chapter 15)

Voluson

730Pro - Basic User Manual

16-8

105831 Rev. 0

Summary of Contents for Voluson 730Pro
































































































































































































































































































































































































































































































Search results

Summary of Contents for Voluson 730Pro

Reviews:

Related manuals for Voluson 730Pro

Brands by name

Popular brands

GE Voluson 730Pro, Basic User Manual

Search results

Summary of Contents for Voluson 730Pro

Reviews:

Related manuals for Voluson 730Pro

Brands by name

Popular brands