GE Voluson 730Pro Basic User Manual Download Page 84

Page: 84 / 480

Starting the System

4.6.4

To Search in the Patient List

Select the

[

]

button using the trackball cursor and enter with the left or right

trackball key.

This button is available in the “Patient Information” screen.

The “Search Results Dialog” menu appears on screen.

Search procedure:

•

Enter ID or Name into the corresponding input field by the keyboard keys.

•

Select the result using the trackball cursor and the left or right trackball button.

The result is highlighted.

(Double-clicking selects and copies the result immediately to the “Patient Information” screen.)

•

or click the

[

Select

]

button.

The search result will be copied to the patient dialog screen.
The “Patient Information” screen appears again.

Exit from the search dialog screen, no result will be copied.
The “Patient Information” screen appears again.

Voluson

730Pro - Basic User Manual

4-16

105831 Rev. 0

Summary of Contents for Voluson 730Pro
































































































































































































































































































































































































































































































Search results

Summary of Contents for Voluson 730Pro

Reviews:

Related manuals for Voluson 730Pro

Brands by name

Popular brands

GE Voluson 730Pro, Basic User Manual

Search results

Summary of Contents for Voluson 730Pro

Reviews:

Related manuals for Voluson 730Pro

Brands by name

Popular brands