GE Voluson 730Pro Basic User Manual Download Page 210

Page: 210 / 480

Volume Mode

5. Select the reference image A , B or C by pressing the left trackball key

repeatedly. (e.g.

)

The selected reference image is surrounded with a green line.

3. Press

the

[

Trackball Menu Navigation

]

key.

Note:

This key may have to be reselected depending on the function of the trackball.

4. Move the trackball to the desired view direction for the niche mode

and press the right or left trackball key

[

Set

]

5. Press

the

[

Trackball Menu Navigation

]

key again, move the

trackball to select the Niche rotation and press

[

Set

]

6. Move the trackball to rotate the niche mode image about the selected axis.

−

Y-axis

[

horizontal

]

−

X-axis

[

vertical

]

Voluson

730Pro - Basic User Manual

11-26

105831 Rev. 0

Summary of Contents for Voluson 730Pro
































































































































































































































































































































































































































































































Search results

Summary of Contents for Voluson 730Pro

Reviews:

Related manuals for Voluson 730Pro

Brands by name

Popular brands

GE Voluson 730Pro, Basic User Manual

Search results

Summary of Contents for Voluson 730Pro

Reviews:

Related manuals for Voluson 730Pro

Brands by name

Popular brands