GE Voluson 730Pro Basic User Manual Download Page 350

Page: 350 / 480

Sonoview

15.2.5.2

2D Cine Mode

If a 2D Cine sequence has been stored to Sonoview, the buttons for cine
are displayed at the left and lower part of the image.

Click the

[

►

]

button, the 2D Cine mode will run.

15.2.5.3

3D Rotation Cine Mode

If a 3D Rotation Cine sequence has been stored to Sonoview, the

[

►

]

button is displayed, and the number of saved images are displayed at the
left and lower part of the image (in full screen size).

Click the

[

►

]

button, the 3D Rot. Cine mode will run.

15.2.5.4

4D Image Cine Mode

If a 4D Cine sequence has been stored to Sonoview, the

[

►

]

button is displayed

at the left and lower part of the image.
Click the

[

►

]

button, the 4D Image Cine mode will run.

15.2.5.5

Images with Text Comment

If images are saved with text comment, the

[

]

button is displayed at the right lower

part of the image. To view the Comment click the

[

]

button.

The text can be modified or deleted (max. 40 characters).

15.2.5.6

Images with Voice Comment

If images are saved with voice comment, the

[

♫

►

]

button is displayed at the right

lower part of the image.

To hear the voice comment of the image, click the

[

♫

►

]

button.

Voluson

730Expert - Basic User Manual

15-10

105850 Rev. 0

Summary of Contents for Voluson 730Pro
































































































































































































































































































































































































































































































Search results

Summary of Contents for Voluson 730Pro

Reviews:

Related manuals for Voluson 730Pro

Brands by name

Popular brands

GE Voluson 730Pro, Basic User Manual

Search results

Summary of Contents for Voluson 730Pro

Reviews:

Related manuals for Voluson 730Pro

Brands by name

Popular brands